Partes

No se requieren partes.

Identify the black air concentrating nozzle.
  • Identify the black air concentrating nozzle.

Agregar Comentario

Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
  • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

Agregar Comentario

Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.
  • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

  • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Detach the hair dryer grating from the body by gently twisting the grating from side to side.
  • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

Agregar Comentario

Separate the hair dryer grating into the three pieces seen in the image.
  • Separate the hair dryer grating into the three pieces seen in the image.

Agregar Comentario

Locate the screws on the handle and remove with a Phillips screwdriver
  • Locate the screws on the handle and remove with a Phillips screwdriver

Agregar Comentario

Carefully separate the plastic case with Plastic Opening Tools
  • Carefully separate the plastic case with Plastic Opening Tools

Agregar Comentario

Your hairdryer should now be disassembled and you should easily be able to see the fan, motor, heating element cover, and internal wiring.
  • Your hairdryer should now be disassembled and you should easily be able to see the fan, motor, heating element cover, and internal wiring.

Agregar Comentario

After disassembly and isolating the button switchboard, locate the small component that is directly connected to the power cord. Desolder the wires using a desoldering wick and a soldering iron. Refer to the soldering page below.
  • After disassembly and isolating the button switchboard, locate the small component that is directly connected to the power cord. Desolder the wires using a desoldering wick and a soldering iron. Refer to the soldering page below.

  • Soldering Skills

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Mitch

Miembro Desde 04/10/12

28 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 24-29, Regan Fall 2012 Miembro de Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 8

Últimos 7 Días: 57

Últimos 30 Días: 244

Todo El Tiempo: 10,681