Partes

No se requieren partes.

Identify the black air concentrating nozzle.
  • Identify the black air concentrating nozzle.

Agregar Comentario

Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
  • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

Agregar Comentario

Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.
  • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

  • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

Agregar Comentario

Detach the hair dryer grating from the body by gently twisting the grating from side to side.
  • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Separate the hair dryer grating into the three pieces seen in the image.
  • Separate the hair dryer grating into the three pieces seen in the image.

Agregar Comentario

Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.
  • Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.

Agregar Comentario

Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.
  • Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.

Agregar Comentario

The hair dryer is now  disassembled. The fan, motor, heating element cover, and internal wiring are exposed.
  • The hair dryer is now disassembled. The fan, motor, heating element cover, and internal wiring are exposed.

    • Identify the turbo button.

    • Identify the button switchboard.

Agregar Comentario

Gently pull the turbo button away from the hair dryer body.
  • Gently pull the turbo button away from the hair dryer body.

    • If the turbo setting is still not working after you replace the switchboard, consider using soldering techniques to replace the turbo button .

Agregar Comentario

Gently pull the button switchboard away from the hair dryer body.
  • Gently pull the button switchboard away from the hair dryer body.

  • Using a desoldering wick and a soldering iron, desolder the wires.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Mitch

Miembro Desde 04/10/12

28 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 24-29, Regan Fall 2012 Miembro de Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 5

Últimos 7 Días: 18

Últimos 30 Días: 72

Todo El Tiempo: 3,822