Remove the back of the phone by pushing firmly with your thumbs up towards the camera.
  • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

  • Remove both the battery and the SD card (Press SD card in to release)

  • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

Agregar Comentario

Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.
  • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

  • Insert the flat end between the back and front enclosure, working your way around the rim.

Agregar Comentario

Gently  depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.
  • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

  • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Carefully separate the front and back enclosures once all of the clips have been disengaged. Be sure to not separate too quickly or you risk breaking an attached tab.
  • Carefully separate the front and back enclosures once all of the clips have been disengaged.

  • Be sure to not separate too quickly or you risk breaking an attached tab.

Agregar Comentario

Release the two ribbon cables using a plastic opening tool. Gently pry up the pop connectors used to attach the ribbon cables to the motherboard.
  • Release the two ribbon cables using a plastic opening tool.

  • Gently pry up the pop connectors used to attach the ribbon cables to the motherboard.

Agregar Comentario

Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver. Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver.
  • Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver.

Agregar Comentario

Gently lift the motherboard out of the front enclosure once the screws are removed. Gently lift the motherboard out of the front enclosure once the screws are removed.
  • Gently lift the motherboard out of the front enclosure once the screws are removed.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 3-26, Amido Winter 2012 Miembro de Cal Poly, Team 3-26, Amido Winter 2012

CPSU-AMIDO-W12S3G26

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,401