Saltar al contenido principal

General Electric Telephone 2-9710A Phone Cord Replacement

Qué necesitas

  1. General Electric Telephone 2-9710A Phone Cord Replacement, Phone Cord: paso 1, imagen 1 de 2 General Electric Telephone 2-9710A Phone Cord Replacement, Phone Cord: paso 1, imagen 2 de 2
    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.

    • To release the cable, gently press down on the top plastic tab of the connector.

  2. General Electric Telephone 2-9710A Phone Cord Replacement: paso 2, imagen 1 de 3 General Electric Telephone 2-9710A Phone Cord Replacement: paso 2, imagen 2 de 3 General Electric Telephone 2-9710A Phone Cord Replacement: paso 2, imagen 3 de 3
    • Remove the 7.5 mm screw.

    • Remove the screw cap.

    • Pull up the phone cord to remove it from the base.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 16-59, Forte Fall 2012 Miembro de Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Miembros

17 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 8

Todo El Tiempo: 1,091