Saltar al contenido principal

GD Midea FT30-3D Fan Blades Replacement

Qué necesitas

  1. GD Midea FT30-3D Fan Blades Replacement, Fan Blades: paso 1, imagen 1 de 2 GD Midea FT30-3D Fan Blades Replacement, Fan Blades: paso 1, imagen 2 de 2
    • Release the 3 clips that attach the front fan guard to the rear fan guard.

    • Notice: The lower connecting bracket is NOT a clip. It acts as a mounting alignment bracket for the front fan guard.

  2. GD Midea FT30-3D Fan Blades Replacement: paso 2, imagen 1 de 1
    • Pull the front fan guard off.

  3. GD Midea FT30-3D Fan Blades Replacement: paso 3, imagen 1 de 2 GD Midea FT30-3D Fan Blades Replacement: paso 3, imagen 2 de 2
    • Remove the spinner from the center of the fan blade.

  4. GD Midea FT30-3D Fan Blades Replacement: paso 4, imagen 1 de 1
    • The fan blades should now be easy to lift up.

    • When reassembling the fan make sure the notches in the center of the fan blade line up with the protrusions in the motor's shaft.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Alan Su

Miembro Desde 10/03/12

810 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 24-28, Regan Fall 2012 Miembro de Cal Poly, Team 24-28, Regan Fall 2012

CPSU-REGAN-F12S24G28

4 Miembros

14 Guías creadas

Un comentario

Where do you buy the fan blades?

charlie - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 3,211