Saltar al contenido principal

FujiFilm FinePix A340 Flash Unit Replacement

Qué necesitas

  1. FujiFilm FinePix A340 Flash Unit Replacement, Outer Case: paso 1, imagen 1 de 1
    • To prevent the danger of electric shock, remove the batteries before continuing to the next steps.

    • Slide the battery cover to the side to release the batteries.

  2. FujiFilm FinePix A340 Flash Unit Replacement: paso 2, imagen 1 de 3 FujiFilm FinePix A340 Flash Unit Replacement: paso 2, imagen 2 de 3 FujiFilm FinePix A340 Flash Unit Replacement: paso 2, imagen 3 de 3
    • Remove five screws from the camera casing using a tri-point Y0 screwdriver.

  3. FujiFilm FinePix A340 Flash Unit Replacement: paso 3, imagen 1 de 2 FujiFilm FinePix A340 Flash Unit Replacement: paso 3, imagen 2 de 2
    • Grab the case with your hands and slowly pull back the outer casing.

  4. FujiFilm FinePix A340 Flash Unit Replacement, LCD Screen: paso 4, imagen 1 de 1
    • Locate the LCD screen and anchoring screw.

    • Remove screw.

  5. FujiFilm FinePix A340 Flash Unit Replacement: paso 5, imagen 1 de 1
    • Carefully pull the LCD screen away from the board it is connected to.

  6. FujiFilm FinePix A340 Flash Unit Replacement: paso 6, imagen 1 de 1
    • Push both blue switches away from the holding device to unleach lcd ribbon.

    • Be careful when removing ribbon. If you damage it, you will need to replace it as well.

  7. FujiFilm FinePix A340 Flash Unit Replacement: paso 7, imagen 1 de 1
    • Carefully detach the ribbon from where it was connected by the blue pins.

  8. FujiFilm FinePix A340 Flash Unit Replacement: paso 8, imagen 1 de 1
    • Now that everything has been disconnected from the board, remove LCD screen.

  9. FujiFilm FinePix A340 Flash Unit Replacement, Motherboard: paso 9, imagen 1 de 1
    • Remove the two screws holding the circuit board down.

  10. FujiFilm FinePix A340 Flash Unit Replacement: paso 10, imagen 1 de 2 FujiFilm FinePix A340 Flash Unit Replacement: paso 10, imagen 2 de 2
    • Remove black sticky tape from circuit board and camera case.

  11. FujiFilm FinePix A340 Flash Unit Replacement: paso 11, imagen 1 de 2 FujiFilm FinePix A340 Flash Unit Replacement: paso 11, imagen 2 de 2
    • Gently pull the circuit board away from the front side of the camera.

    • Be careful when removing assembly as to not break any solder leads or damage lens assembly.

  12. FujiFilm FinePix A340 Flash Unit Replacement: paso 12, imagen 1 de 2 FujiFilm FinePix A340 Flash Unit Replacement: paso 12, imagen 2 de 2
    • Remove the logic board by pulling straight away from assembly.

  13. FujiFilm FinePix A340 Flash Unit Replacement, Flash Unit: paso 13, imagen 1 de 1
    • Locate the flash unit of the camera. It includes the camera's flash and a capacitor.

  14. FujiFilm FinePix A340 Flash Unit Replacement: paso 14, imagen 1 de 2 FujiFilm FinePix A340 Flash Unit Replacement: paso 14, imagen 2 de 2
    • Unsolder the flash unit at it's three points.

    • Be careful not to damage the circuit board or surrounding parts with the solder iron.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Cody

Miembro Desde 04/18/10

47 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 7-11, Maness Spring 2010 Miembro de Cal Poly, Team 7-11, Maness Spring 2010

CPSU-MANESS-S10S7G11

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 3,888