Introducción

Is your LCD damaged? It is time to replace it! This guide will show you all the steps required to replace your camera Screen Display. It is simple and a good DIY project. Save your money and fix your camera yourself.

Herramientas

Partes

No se requieren partes.

Remove Batteries Remove exterior Screws Remove exterior Screws
  • Remove Batteries

  • Remove exterior Screws

Agregar Comentario

MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Rear Housing Case Remove screw Release flex cable from Main Board
  • Rear Housing Case

  • Remove screw

  • Release flex cable from Main Board

  • Release the clamps from the notches to free the top rear plate

Agregar Comentario

Release the LCD flex cable from the ziff socket.  Careful not to damage ziff clamp Next swap out your old LCD with your new LCD and reverse the steps.
  • Release the LCD flex cable from the ziff socket. Careful not to damage ziff clamp

  • Next swap out your old LCD with your new LCD and reverse the steps.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sales Cameraparts4you

Miembro Desde 01/07/16

1,806 Reputación

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 2