Introducción

Removing the front cover is a necessary first step in disassembling the camera in order to repair or replace any internal parts.

Partes

No se requieren partes.

Locate the battery door at the bottom of the camera. Press down on the door and  slide it back.  The door will pop open.
  • Locate the battery door at the bottom of the camera.

  • Press down on the door and slide it back. The door will pop open.

Agregar Comentario

Remove the battery.
  • Remove the battery.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
There are two screws on the left and right sides of the camera, and two screws on the bottom. Use a PH00 screwdriver and remove the six 2.9mm screws. Use a PH00 screwdriver and remove the six 2.9mm screws.
  • There are two screws on the left and right sides of the camera, and two screws on the bottom.

  • Use a PH00 screwdriver and remove the six 2.9mm screws.

Agregar Comentario

Use hands to gently pry the front casing away from the camera. Use hands to gently pry the front casing away from the camera.
  • Use hands to gently pry the front casing away from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

iDeleted

Miembro Desde 07/07/10

2,101 Reputación

41 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 2,240