Saltar al contenido principal

Disassembling Sirius Stiletto 100 Front Cover

Qué necesitas

  1. Disassembling Sirius Stiletto 100 Front Cover, Front Cover: paso 1, imagen 1 de 2 Disassembling Sirius Stiletto 100 Front Cover, Front Cover: paso 1, imagen 2 de 2
    • Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.

  2. Disassembling Sirius Stiletto 100 Front Cover: paso 2, imagen 1 de 2 Disassembling Sirius Stiletto 100 Front Cover: paso 2, imagen 2 de 2
    • Use a Philip's head screw driver to remove the screws from the case.

    • Place the screws in a small container to avoid losing them.

  3. Disassembling Sirius Stiletto 100 Front Cover: paso 3, imagen 1 de 3 Disassembling Sirius Stiletto 100 Front Cover: paso 3, imagen 2 de 3 Disassembling Sirius Stiletto 100 Front Cover: paso 3, imagen 3 de 3
    • Remove the front cover.

    • First, insert a small pry bar where the black front cover and white back cover meet.

    • Begin prying the black plastic up, slowing moving around to the bottom and other side.

    • At an angle, carefully pull up on the front cover separate the two pieces.

    • Excellent! Now you have removed the front cover!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Trey

Miembro Desde 03/09/12

80 Reputación

2 Guías creadas

Equipo

Clemson, Team 2-1, Benson Spring 2012 Miembro de Clemson, Team 2-1, Benson Spring 2012

CLEM-BENSON-S12S2G1

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,559