Introducción

How to remove all speakers on the phone.

Push open the latch and remove the battery. Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Agregar Comentario

Twist off the antenna. Pop off the transparent cylinder.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Agregar Comentario

Remove the five screws as shown.
  • Remove the five screws as shown.

Agregar Comentario

Carefully pry the back plate off.
  • Carefully pry the back plate off.

Agregar Comentario

Carefully detach golden screen connector. Carefully detach golden screen connector.
  • Carefully detach golden screen connector.

Agregar Comentario

Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Agregar Comentario

Place the logic board on a clean tray. Place the logic board on a clean tray.
  • Place the logic board on a clean tray.

Agregar Comentario

Remove the hinge on the phone. Put pressure on the spring with the screwdriver to unhinge phone.
  • Remove the hinge on the phone.

    • Put pressure on the spring with the screwdriver to unhinge phone.

  • Make sure to pull the gold wire through, don't let it rip.

Agregar Comentario

Remove the four screws as shown Use the spudger to pry it open, excessive force may be necessary. Use the spudger to pry it open, excessive force may be necessary.
  • Remove the four screws as shown

  • Use the spudger to pry it open, excessive force may be necessary.

Agregar Comentario

Remove the three screws that hold the big speaker Caution: The wires are attached to the screen and should be removed with care. Caution: The wires are attached to the screen and should be removed with care.
  • Remove the three screws that hold the big speaker

    • Caution: The wires are attached to the screen and should be removed with care.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

doconnor

Miembro Desde 19/04/10

25 Reputación

12 Guías creadas

Equipo

Cal Poly, Team 10-43, Garner Spring 2010 Miembro de Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 1,830