Introducción

How to take out the buttons and replace them.

Partes

No se requieren partes.

Locate the battery cover on the bottom of the camera.
  • Locate the battery cover on the bottom of the camera.

Agregar Comentario

Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
  • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

Agregar Comentario

Remove the batteries from the camera.
  • Remove the batteries from the camera.

Agregar Comentario

Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.
  • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

Agregar Comentario

Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
  • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

  • Repeat this step for the back casing.

Agregar Comentario

Pop the necessary buttons out of the plastic housing.
  • Pop the necessary buttons out of the plastic housing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Dani

Miembro Desde 24/06/10

21 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 3-3, Johann Summer 2010 Miembro de Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 811