Introducción

This guide is a step by step procedure to disassemble the base of the phone. It is the preliminary step in gaining access to the inner components of the Nokia 2366i.

Turn off the phone. Position the phone so that the back side is in view.
  • Turn off the phone.

  • Position the phone so that the back side is in view.

Agregar Comentario

Apply pressure on the cover while simultaneously sliding the cover downward.
  • Apply pressure on the cover while simultaneously sliding the cover downward.

  • Remove the back battery cover.

Agregar Comentario

Insert the spudger between the base of the phone and the phone battery. Position the phone so that the battery won't fall out of the phone. Carefully lift the battery out of the phone.
  • Insert the spudger between the base of the phone and the phone battery.

  • Position the phone so that the battery won't fall out of the phone.

  • Carefully lift the battery out of the phone.

    • The battery lifts out of the phone easily.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Use a Phillips #00 screwdriver or your fingers to remove the rubber tabs at top back of the phone. Use a Phillips #00 screwdriver or your fingers to remove the rubber tabs at top back of the phone.
  • Use a Phillips #00 screwdriver or your fingers to remove the rubber tabs at top back of the phone.

Agregar Comentario

Remove four 5mm screws from the back of the phone using a T6 Torx screwdriver: 2 screws at the bottom
  • Remove four 5mm screws from the back of the phone using a T6 Torx screwdriver:

    • 2 screws at the bottom

    • 2 screws at the top

Agregar Comentario

Rotate the phone clockwise so the edge is facing you. Insert the spudger in tabs between the outer casing and the inside frame.
  • Rotate the phone clockwise so the edge is facing you.

  • Insert the spudger in tabs between the outer casing and the inside frame.

  • Slide the spudger upwards.

    • This will remove the rear case of the phone.

Agregar Comentario

The phone should now be in two different sections.
  • The phone should now be in two different sections.

    • 1) The rear case of the phone.

    • 2) The motherboard and the rest of the phone.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jonathan Newman

Miembro Desde 21/01/11

486 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 1-14, Amido Winter 2011 Miembro de Cal Poly, Team 1-14, Amido Winter 2011

CPSU-AMIDO-W11S1G14

5 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,430