Introducción

Removing the Main Display

Partes

No se requieren partes.

Turn off the phone. Position the phone so that the back side is in view.
  • Turn off the phone.

  • Position the phone so that the back side is in view.

Agregar Comentario

Apply pressure on the cover while simultaneously sliding the cover downward.
  • Apply pressure on the cover while simultaneously sliding the cover downward.

  • Remove the back battery cover.

Agregar Comentario

Insert the spudger between the base of the phone and the phone battery. Position the phone so that the battery won't fall out of the phone. Carefully lift the battery out of the phone.
  • Insert the spudger between the base of the phone and the phone battery.

  • Position the phone so that the battery won't fall out of the phone.

  • Carefully lift the battery out of the phone.

    • The battery lifts out of the phone easily.

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Keep the phone closed.
  • Keep the phone closed.

  • Hold the phones sideways with the front cover of the phone facing up.

Agregar Comentario

Find the slight crease on the side that divides the display assembly in half. Slowly wedge the spudger into the crease.
  • Find the slight crease on the side that divides the display assembly in half.

  • Slowly wedge the spudger into the crease.

    • It's a little difficult to perform this step because the crease is narrow. Do not rush because you may damage the phone

Agregar Comentario

Run the spudger all along the crease while lifting up. Separate the front cover from the front base.
  • Run the spudger all along the crease while lifting up.

  • Separate the front cover from the front base.

Agregar Comentario

Remove the four 5mm screws on the metal casing using the T6 Torx screwdriver. Remove the four 5mm screws on the metal casing using the T6 Torx screwdriver.
  • Remove the four 5mm screws on the metal casing using the T6 Torx screwdriver.

Agregar Comentario

Using the spudger, disconnect the green display cable. Using the spudger, disconnect the green display cable.
  • Using the spudger, disconnect the green display cable.

Agregar Comentario

Lift the metal casing. Be careful not to pull the casing too hard because it is still attached to the phone by a wire. Remove the main display from under the metal casing.
  • Lift the metal casing.

    • Be careful not to pull the casing too hard because it is still attached to the phone by a wire.

  • Remove the main display from under the metal casing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Michael Machado

Miembro Desde 21/01/11

334 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 1-14, Amido Winter 2011 Miembro de Cal Poly, Team 1-14, Amido Winter 2011

CPSU-AMIDO-W11S1G14

5 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 963