Introducción

The Circuit board has the screen and microphone attached, but the speaker and antenna can be modified separately.

First, apply pressure with your thumb on the top of the battery cover.
  • First, apply pressure with your thumb on the top of the battery cover.

Agregar Comentario

Next, pull down on the cover until it begins to slide.
  • Next, pull down on the cover until it begins to slide.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).
  • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

Agregar Comentario

Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.
  • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

Agregar Comentario

Detach back part of the case by gently lifting up.
  • Detach back part of the case by gently lifting up.

Agregar Comentario

Remove the old or broken circuit board from the front case.
  • Remove the old or broken circuit board from the front case.

  • Clip the red and black wires at the base of the motherboard to completely separate it from the radio case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team 19-43, Regan Winter 2013 Miembro de Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 615