Introducción

This guide aims to teach the owner of a Microtek Scanmaker 5900 how to remove the lid of the device.

Loosen the screws on the serial port by turning them counter clockwise by hand. After loosening the screws, pull the serial port out. After loosening the screws, pull the serial port out.
  • Loosen the screws on the serial port by turning them counter clockwise by hand.

  • After loosening the screws, pull the serial port out.

Agregar Comentario

Lift lid to its vertical position. Pull lid straight up to remove it from the scanner. Pull lid straight up to remove it from the scanner.
  • Lift lid to its vertical position.

  • Pull lid straight up to remove it from the scanner.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Taylor Nesheim

Miembro Desde 11/10/11

59 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 6-9, Regan Fall 2011 Miembro de Cal Poly, Team 6-9, Regan Fall 2011

CPSU-REGAN-F11S6G9

2 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,089