Introducción

This guide will show you how to remove the top case of the Macintosh IIsi

Partes

No se requieren partes.

Start by turning the computer around, and remove this #0 Phillips Screw. There may or may not be a Phillips #0 screw here, depending on whether or not the computer has ever been serviced.
  • Start by turning the computer around, and remove this #0 Phillips Screw.

  • There may or may not be a Phillips #0 screw here, depending on whether or not the computer has ever been serviced.

Agregar Comentario

Now lift these two clips, and slowly pivot the case up. You can now seperate the top of the computer from the rest of the machine. You can now seperate the top of the computer from the rest of the machine.
  • Now lift these two clips, and slowly pivot the case up.

  • You can now seperate the top of the computer from the rest of the machine.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Chris Green

Miembro Desde 11/10/09

31,987 Reputación

47 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

277 Miembros

725 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 1,491