Introducción

The Macintosh IIsi has a case fan mouted on inside back of the computer case.

The fan recieves power from two contacts on the logic board and has no connector.
  • The fan recieves power from two contacts on the logic board and has no connector.

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
In all of the years that I have worked on this machine, I have found no good way to remove the fan. The best way to start, is to push in here on the side of the fan. Being careful not to exert too much force, try to push in, and wiggle the fan outward as such. (2nd Photo)
  • In all of the years that I have worked on this machine, I have found no good way to remove the fan.

  • The best way to start, is to push in here on the side of the fan.

  • Being careful not to exert too much force, try to push in, and wiggle the fan outward as such. (2nd Photo)

  • You can now lift the fan all the way out, and remove it.

  • The Fan Power Contacts on the Logic Board:

There is no need to pull out the fan. Just take a knife and you can squeeze the tab in step 7

Willy Kaiser - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Chris Green

Miembro Desde 11/10/09

31,845 Reputación

46 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

276 Miembros

717 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 1,561