Repara tus cosas Comunidad Tienda

Disassembling General Electric Telephone 2-9710A Handset

Introducción

This is a streamlined guide on how to disassemble General Electric Telephone 2-9710A Handset. The tools needed are the Fixit Opening Tool and a Phillips #1 Screwdriver. There are many parts at risk of being damaged, ensure that you follow the procedure with care. The time needed to complete this procedure is approximately fifteen to thirty minutes.

Qué necesitas

  1. Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: paso 1, imagen 1 de 2 Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: paso 1, imagen 2 de 2

    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.

    • To release the cable, gently press down on the top plastic tab of the connector.

    Traducir

  2. Disassembling General Electric Telephone 2-9710A Handset: paso 2, imagen 1 de 3 Disassembling General Electric Telephone 2-9710A Handset: paso 2, imagen 2 de 3 Disassembling General Electric Telephone 2-9710A Handset: paso 2, imagen 3 de 3

    • Remove the 7.5 mm screw.

    • Remove the screw cap.

    • Pull up the phone cord to remove it from the base.

    Traducir

  3. Disassembling General Electric Telephone 2-9710A Handset, General Electric Telephone 2-9710A Handset: paso 3, imagen 1 de 2 Disassembling General Electric Telephone 2-9710A Handset, General Electric Telephone 2-9710A Handset: paso 3, imagen 2 de 2

    • Remove the plastic cover with a plastic opening tool by gently sliding the tool underneath the plastic and pry the cover off.

    Traducir

  4. Disassembling General Electric Telephone 2-9710A Handset: paso 4, imagen 1 de 1

    • Remove the paper with a plastic opening tool by gently sliding the tool underneath and prying the paper away from the phone.

    Traducir

  6. Disassembling General Electric Telephone 2-9710A Handset: paso 5, imagen 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: paso 5, imagen 2 de 2

    • Remove the rubber stopper with a plastic opening tool by gently sliding the tool underneath and pry away from the phone.

    Traducir

  7. Disassembling General Electric Telephone 2-9710A Handset: paso 6, imagen 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: paso 6, imagen 2 de 2

    • Remove the two 2.1 mm screws with a Phillips #1 screwdriver.

    Traducir

  8. Disassembling General Electric Telephone 2-9710A Handset: paso 7, imagen 1 de 1

    • Pull apart the handset by pulling the top shell away from the other half of the phone.

    Traducir

  9. Disassembling General Electric Telephone 2-9710A Handset: paso 8, imagen 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: paso 8, imagen 2 de 2

    • Remove 3 screws attaching the motherboard to shell.

    • Remove the 13 mm screw with a Philips #1 screwdriver.

    • Remove the two 13 mm screws with washers with a Philips #1 screwdriver.

    Traducir

  10. Disassembling General Electric Telephone 2-9710A Handset: paso 9, imagen 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: paso 9, imagen 2 de 2

    • Slide the phone jack out from the shell by gently lifting up the female phone jack connector.

    Traducir

  11. Disassembling General Electric Telephone 2-9710A Handset: paso 10, imagen 1 de 1

    • Without removing the motherboard completely, pull up slightly and pivot the motherboard out of the shell.

    • Be careful not to pull the connectors out.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 12 otros colaboradores

Alles Rebel

Miembro Desde 09/20/12

72 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 16-59, Forte Fall 2012 Miembro de Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Miembros

17 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 24

Todo El Tiempo: 2,694