Saltar al contenido principal

Canon Powershot SD880 Flash Replacement

Qué necesitas

  1. Canon Powershot SD880 Flash Replacement, Back Cover: paso 1, imagen 1 de 3 Canon Powershot SD880 Flash Replacement, Back Cover: paso 1, imagen 2 de 3 Canon Powershot SD880 Flash Replacement, Back Cover: paso 1, imagen 3 de 3
    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

  2. Canon Powershot SD880 Flash Replacement, Front Cover: paso 2, imagen 1 de 3 Canon Powershot SD880 Flash Replacement, Front Cover: paso 2, imagen 2 de 3 Canon Powershot SD880 Flash Replacement, Front Cover: paso 2, imagen 3 de 3
    • Remove the 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Remove the 4.1 mm screw from the menu button side of the camera using a Phillips #00 screwdriver.

    • The two screws on the other side of the camera were already removed when the back cover was taken off.

  3. Canon Powershot SD880 Flash Replacement, Top Panel: paso 3, imagen 1 de 2 Canon Powershot SD880 Flash Replacement, Top Panel: paso 3, imagen 2 de 2
    • Unplug the green and white plugs that connect the top panel to the top of the logic board.

    • Dislodge the tab above the lens.

    • Dislodge the tab at the back.

  4. Canon Powershot SD880 Flash Replacement, LCD Display: paso 4, imagen 1 de 3 Canon Powershot SD880 Flash Replacement, LCD Display: paso 4, imagen 2 de 3 Canon Powershot SD880 Flash Replacement, LCD Display: paso 4, imagen 3 de 3
    • Remove the two 2.9 mm screws at the top-right corner and bottom-left corner of the LCD screen using a Phillips #0 screwdriver.

    • Disconnect the ribbons that connect the screen to the camera.

    • Lift the screen off.

  5. Canon Powershot SD880 Flash Replacement, Flash: paso 5, imagen 1 de 3 Canon Powershot SD880 Flash Replacement, Flash: paso 5, imagen 2 de 3 Canon Powershot SD880 Flash Replacement, Flash: paso 5, imagen 3 de 3
    • Use caution when removing the flash, as the capacitor may still have a charge.

    • Remove two 1.8 mm screws from the back using a Phillips #0 screwdriver to disconnect the metal guard.

    • To unplug the ribbon at the top of the camera, gently pull it from the plug-in point.

    • Disconnect the white plug from the red and black wires.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Robert Manno

Miembro Desde 01/05/11

432 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 13-3, Forte Winter 2011 Miembro de Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 2,529