Saltar al contenido principal

Disassembling Canon PowerShot SD850 IS Case Removal

Qué necesitas

  1. Disassembling Canon PowerShot SD850 IS Case Removal, Battery: paso 1, imagen 1 de 3 Disassembling Canon PowerShot SD850 IS Case Removal, Battery: paso 1, imagen 2 de 3 Disassembling Canon PowerShot SD850 IS Case Removal, Battery: paso 1, imagen 3 de 3
    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

  2. Disassembling Canon PowerShot SD850 IS Case Removal: paso 2, imagen 1 de 2 Disassembling Canon PowerShot SD850 IS Case Removal: paso 2, imagen 2 de 2
    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

  3. Disassembling Canon PowerShot SD850 IS Case Removal, Case: paso 3, imagen 1 de 2 Disassembling Canon PowerShot SD850 IS Case Removal, Case: paso 3, imagen 2 de 2
    • Remove the following 4 screws:

    • Two 2.8 mm Phillips #00 at the bottom of the camera.

    • Two 2.75 mm Phillips #00 on the opposite side of the wrist strap.

  4. Disassembling Canon PowerShot SD850 IS Case Removal: paso 4, imagen 1 de 3 Disassembling Canon PowerShot SD850 IS Case Removal: paso 4, imagen 2 de 3 Disassembling Canon PowerShot SD850 IS Case Removal: paso 4, imagen 3 de 3
    • Open the A/V OUT DIGITAL flap on the side of the wrist strap.

    • Remove the 2.75 mm Phillips #00 under the A/V OUT DIGITAL flap on the side of the wrist strap.

  5. Disassembling Canon PowerShot SD850 IS Case Removal: paso 5, imagen 1 de 2 Disassembling Canon PowerShot SD850 IS Case Removal: paso 5, imagen 2 de 2
    • On the bottom of the camera, use your fingernail to slide the light gray tab towards the edge of the camera.

    • Slide light gray door and pull up to open the door.

    • Remove the 8.35 mm Phillips #00 next to the brown tab that holds the battery.

  6. Disassembling Canon PowerShot SD850 IS Case Removal: paso 6, imagen 1 de 2 Disassembling Canon PowerShot SD850 IS Case Removal: paso 6, imagen 2 de 2
    • Gently pull the front cover straight out from the camera. This will expose the wiring on the front of the camera.

  7. Disassembling Canon PowerShot SD850 IS Case Removal: paso 7, imagen 1 de 1
    • Remove the 2.75 mm Phillips #00 next to A/V OUT DIGITAL.

  8. Disassembling Canon PowerShot SD850 IS Case Removal: paso 8, imagen 1 de 1
    • Slide the back casing (with the screen protector) off to reveal the LCD and back wiring.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Peter Tran

Miembro Desde 10/06/10

225 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 20-7, Maness Fall 2010 Miembro de Cal Poly, Team 20-7, Maness Fall 2010

CPSU-MANESS-F10S20G7

6 Miembros

7 Guías creadas

Un comentario

Had to exchange a battery/SD card cover on an Ixus970IS. This guide very helpful showing the way due to similar layout of the Ixus and the PS850IS! Thanx a lot! :-)

KBK Copenhagen DK

Keld Baden-Kristensen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 4,203