Saltar al contenido principal

Disassembling Canon PowerShot SD1100 IS LCD screen

Qué necesitas

  1. Disassembling Canon PowerShot SD1100 IS LCD screen, Front and Rear Cover: paso 1, imagen 1 de 2 Disassembling Canon PowerShot SD1100 IS LCD screen, Front and Rear Cover: paso 1, imagen 2 de 2
    • Remove wrist strap and battery.

  2. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 2, imagen 1 de 3 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 2, imagen 2 de 3 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 2, imagen 3 de 3
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 3, imagen 1 de 3 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 3, imagen 2 de 3 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 3, imagen 3 de 3
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 4, imagen 1 de 1
    • The cases should now be removed.

  5. Disassembling Canon PowerShot SD1100 IS LCD screen, LCD screen: paso 5, imagen 1 de 2 Disassembling Canon PowerShot SD1100 IS LCD screen, LCD screen: paso 5, imagen 2 de 2
    • Remove the top-left screw above the LCD screen (0.100 in).

    • Remove the C-shaped plate from the side of the LCD screen.

  6. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 6, imagen 1 de 2 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 6, imagen 2 de 2
    • Remove the screw from the top-right of the LCD screen (0.098 in).

    • Remove the L-shaped bar from the right of the LCD screen.

  7. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 7, imagen 1 de 2 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 7, imagen 2 de 2
    • Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.

  8. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 8, imagen 1 de 1
    • Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.

    • Be gentle. This ribbon should stay attached to the screen.

  9. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 9, imagen 1 de 3 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 9, imagen 2 de 3 Disassembling Canon PowerShot SD1100 IS LCD screen: paso 9, imagen 3 de 3
    • Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera.

    • Use the tweezers to lift this ribbon.

    • Use the tweezers to gently peel this ribbon from the one underneath it.

  10. Disassembling Canon PowerShot SD1100 IS LCD screen: paso 10, imagen 1 de 1
    • The LCD screen should now be removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Tyler Grossheim

Miembro Desde 01/25/11

1,470 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 3-32, Regan Winter 2011 Miembro de Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 3,580