Introducción

This guide will allow you to remove the outer casing of the Canon PowerShot S80.

Partes

No se requieren partes.

Remove the knot on the wrist lanyard. Remove the battery and memory card.
  • Remove the knot on the wrist lanyard.

  • Remove the battery and memory card.

Agregar Comentario

Remove all screws from sides of outer casing. Begin removing the screws on the bottom of the outer casing.
  • Remove all screws from sides of outer casing.

  • Begin removing the screws on the bottom of the outer casing.

  • Remove the rest of the screws from the outer casing.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Gently pull the front cover off the camera. Gently pull the front cover off the camera. Gently pull the front cover off the camera.
  • Gently pull the front cover off the camera.

Agregar Comentario

Open the "A/V Out Digital" cover slide, and remove the screw inside. Gently pull off the back casing. Remove the black "L" shaped piece of metal.
  • Open the "A/V Out Digital" cover slide, and remove the screw inside.

  • Gently pull off the back casing.

  • Remove the black "L" shaped piece of metal.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

BrettH

Miembro Desde 28/10/09

219 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 19-5, Maness SU 2012 Miembro de Cal Poly, Team 19-5, Maness SU 2012

CPSU-MANESS-SU12S19G5

1 Miembro

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 19

Todo El Tiempo: 7,430