Introducción

How to open it for repairs or battery swap

The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side. The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side. The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.
  • The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.

Agregar Comentario

Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back. Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back. Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.
  • Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
remove two more screws to get at the battery remove two more screws to get at the battery remove two more screws to get at the battery
  • remove two more screws to get at the battery

Agregar Comentario

Overview of parts
  • Overview of parts

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

petur

Miembro Desde 23/07/11

178 Reputación

2 Guías creadas

I think it is easier to open the lamp by pressing the semi-transparent part at the opposite side of the button.

Matthieu Morel - Contestar

How can I open the lamp??? Please post a photo of how are u using the knife because I can't!!!

Alberto Santaella Gallego - Contestar

you need to press the clips inward, the picture shows where the clips are. Slide inbetween and press

petur - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 7

Últimos 30 Días: 17

Todo El Tiempo: 1,721