Saltar al contenido principal

Disassembling Apple AirPort Extreme Model A1034 Outer Case

Qué necesitas

  1. Disassembling Apple AirPort Extreme Model A1034 Outer Case, Outer Case: paso 1, imagen 1 de 1
    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

  2. Disassembling Apple AirPort Extreme Model A1034 Outer Case: paso 2, imagen 1 de 1
    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

  3. Disassembling Apple AirPort Extreme Model A1034 Outer Case: paso 3, imagen 1 de 2 Disassembling Apple AirPort Extreme Model A1034 Outer Case: paso 3, imagen 2 de 2
    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

  4. Disassembling Apple AirPort Extreme Model A1034 Outer Case: paso 4, imagen 1 de 1
    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Travis Go

Miembro Desde 10/12/11

158 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 17-15, Regan Fall 2011 Miembro de Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Miembros

13 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 2,759