Introducción

This guide will allow readers to replace the filter adapter on their Dirt Devil Scorpion Quick Flip hand vacuum. The primary reasons to change a filter adapter include improper suction or visible damage to the current filter adapter.

First, press the button on the handle of the vacuum to separate the two halves. The button triggers a release mechanism, detaching the front half from the back of the vacuum.
  • First, press the button on the handle of the vacuum to separate the two halves.

  • The button triggers a release mechanism, detaching the front half from the back of the vacuum.

Agregar Comentario

Once the front half has been separated from the back half, locate the filter adapter.
  • Once the front half has been separated from the back half, locate the filter adapter.

  • The filter adapter is attached to the filter, locating the filter in this step will sufficiently locate the filter adapter.

  • Grasp the filter and adapter. Pull them out together.

Agregar Comentario

Rotate the filter counterclockwise to remove it from the filter adapter. Once the filter adapter has been removed from the filter, replace it.
  • Rotate the filter counterclockwise to remove it from the filter adapter.

  • Once the filter adapter has been removed from the filter, replace it.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joseph Warner

Miembro Desde 11/11/17

201 Reputación

2 Guías creadas

Equipo

IUPUI, Team S1-G1, Wilson Fall 2017 Miembro de IUPUI, Team S1-G1, Wilson Fall 2017

IUPUI-WILSON-F17S1G1

4 Miembros

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 39