Partes

No se requieren partes.

Before removing the battery from the laptop, make sure the power is off.
  • Before removing the battery from the laptop, make sure the power is off.

  • Push both battery locking clips outward at the same time.

Agregar Comentario

Slide the battery out of the laptop.
  • Slide the battery out of the laptop.

Agregar Comentario

Remove the four 4-mm screws on the bottom of the laptop using a #0 screw driver.
  • Remove the four 4-mm screws on the bottom of the laptop using a #0 screw driver.

Agregar Comentario

Carefully turn the laptop over and open the screen all the way. Locate the slot to remove the keyboard in the lower left hand corner.
  • Carefully turn the laptop over and open the screen all the way.

  • Locate the slot to remove the keyboard in the lower left hand corner.

  • Using a spudger as a lever, insert it into the slot and gently pry up.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
After the keyboard pops up, pull it away from the screen just enough to release the tabs.
  • After the keyboard pops up, pull it away from the screen just enough to release the tabs.

  • Don’t pull the keyboard out forcefully as there is still a ribbon attached to the laptop.

Agregar Comentario

Unlock the ZIF connector on the computer by pushing the two outside tabs toward the screen.
  • Unlock the ZIF connector on the computer by pushing the two outside tabs toward the screen.

Agregar Comentario

Remove the flexible ribbon from ZIF connector.
  • Remove the flexible ribbon from ZIF connector.

  • Do not pull on the ribbon to remove it from the ZIF connector.

Agregar Comentario

Position the laptop so that the bottom is facing upward.
  • Position the laptop so that the bottom is facing upward.

  • Remove the 3 #0 4 mm screws holding the bottom of the palm rest.

Agregar Comentario

Return the laptop to proper position and open the screen.
  • Return the laptop to proper position and open the screen.

  • Remove the 6 #0 4 mm screws holding in the palm rest.

Agregar Comentario

Gently lift the palm rest and rotate it outward so that the bottom is now facing up.
  • Gently lift the palm rest and rotate it outward so that the bottom is now facing up.

  • The ribbon attached to the track is short and extremely delicate. Use care when moving the palm rest.

Agregar Comentario

Lift up on the small ZIF connector and remove ribbon.
  • Lift up on the small ZIF connector and remove ribbon.

  • If ribbon seems stuck gently wiggle it to remove. Do not pull ribbon with great force.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Thomas Wong

Miembro Desde 20/01/12

23 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 11-20, Maness Winter 2012 Miembro de Cal Poly, Team 11-20, Maness Winter 2012

CPSU-MANESS-W12S11G20

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 756