Introducción

If the LCD screen is not working, it may be a problem with the video card.

Partes

No se requieren partes.

Remove the battery from the bottom of the laptop.
  • Remove the battery from the bottom of the laptop.

  • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

  • It is important to remove the battery so that you will not be electrocuted while working with the computer's hardware.

Agregar Comentario

Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off. Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover. Be careful of wire attached to underside of the hinge cover.
  • Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.

  • Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover.

  • Be careful of wire attached to underside of the hinge cover.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Pull the small black tab on the right hand side of the laptop.
  • Pull the small black tab on the right hand side of the laptop.

  • The hinge cover has now been removed.

Agregar Comentario

Remove the screws at the top of the keyboard as indicated indicated. Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board. You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.
  • Remove the screws at the top of the keyboard as indicated indicated.

  • Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board.

  • You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.

  • The keyboard should be easily removable at this point.

Agregar Comentario

After removing the keyboard, locate and remove the labeled screws. Gently lift the Video Card unit for replacing. Gently lift the Video Card unit for replacing.
  • After removing the keyboard, locate and remove the labeled screws.

  • Gently lift the Video Card unit for replacing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Brian Murphy

Miembro Desde 13/04/11

347 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 18-22, Garner Spring 2011 Miembro de Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 Miembros

15 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 19

Todo El Tiempo: 6,431