Introducción

Use this guide to replace the optical drive in your computer.

Partes

No se requieren partes.

Locate the case cover latch on the back of the computer.
  • Locate the case cover latch on the back of the computer.

Agregar Comentario

Using your index finger, slide and hold the cover latch down.
  • Using your index finger, slide and hold the cover latch down.

  • While holding the latch down, place your other hand flat on the side of the case and firmly shift the side panel to the left until it disengages.

Agregar Comentario

Grab the edge of the panel and slide it away from the case until it is removed.
  • Grab the edge of the panel and slide it away from the case until it is removed.

Agregar Comentario

Locate the Optical Drive by finding it externally on the case.
  • Locate the Optical Drive by finding it externally on the case.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Press and hold the two levers located behind the front panel. While holding the levers down, swing open the front panel.
  • Press and hold the two levers located behind the front panel.

  • While holding the levers down, swing open the front panel.

Agregar Comentario

Swing the front of the case open until it separates from the main case.
  • Swing the front of the case open until it separates from the main case.

Agregar Comentario

Lay the computer flat on it's side so that you are looking down on all of the components. Locate the Drive 1 cable and where it is connected to the motherboard. Locate the Drive 1 cable and where it is connected to the motherboard.
  • Lay the computer flat on it's side so that you are looking down on all of the components.

  • Locate the Drive 1 cable and where it is connected to the motherboard.

Agregar Comentario

Grasp the end of the Drive 1 cable connected to the motherboard and firmly pull upwards until it is removed.
  • Grasp the end of the Drive 1 cable connected to the motherboard and firmly pull upwards until it is removed.

Agregar Comentario

Locate the end of the Drive 1 cable connected to the optical drive. Grasp the cable and pull firmly to disconnect it from the optical drive.
  • Locate the end of the Drive 1 cable connected to the optical drive.

  • Grasp the cable and pull firmly to disconnect it from the optical drive.

Agregar Comentario

Locate the screw on the optical drive. Remove the 7.7 mm screw by using a Phillips #2 screw-driver.
  • Locate the screw on the optical drive.

  • Remove the 7.7 mm screw by using a Phillips #2 screw-driver.

Agregar Comentario

Remove the optical drive by sliding it out  of the front of the case.
  • Remove the optical drive by sliding it out of the front of the case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Eugene

Miembro Desde 12/10/11

186 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 6-10, Regan Fall 2011 Miembro de Cal Poly, Team 6-10, Regan Fall 2011

CPSU-REGAN-F11S6G10

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 10

Todo El Tiempo: 5,339