Flip the device over to the back side.
  • Flip the device over to the back side.

Agregar Comentario

Slide the small switch on the back to "MAIN".
  • Slide the small switch on the back to "MAIN".

Agregar Comentario

Slide the battery cover downwards.
  • Slide the battery cover downwards.

  • Pull off the battery cover.

Agregar Comentario

Pull the black tab to remove the battery.
  • Pull the black tab to remove the battery.

Agregar Comentario

Using the Phillips #00 screwdriver, remove the two screws near the top of the device.
  • Using the Phillips #00 screwdriver, remove the two screws near the top of the device.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.
  • Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.

Agregar Comentario

Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.
  • Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.

Agregar Comentario

Pry the two halves of the case apart with the small flat head screwdriver.
  • Pry the two halves of the case apart with the small flat head screwdriver.

Agregar Comentario

Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.
  • Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.

  • Lay the two halves of the outer case next to the central components as shown.

Agregar Comentario

Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.
  • Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.

Agregar Comentario

Lift the tab on the motherboard and pull out the ribbon cable. After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.
  • Lift the tab on the motherboard and pull out the ribbon cable.

  • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

Agregar Comentario

Using the #00 Phillips screwdriver, remove the screws on the back of the front case. There are five total.
  • Using the #00 Phillips screwdriver, remove the screws on the back of the front case. There are five total.

Agregar Comentario

Pull the ribbon cable out of its port on the back of the keypad.
  • Pull the ribbon cable out of its port on the back of the keypad.

Agregar Comentario

The keypad can now be lifted off the front case.
  • The keypad can now be lifted off the front case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ryan Fernandez

Miembro Desde 03/04/12

47 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 5-4, Forte Spring 2012 Miembro de Cal Poly, Team 5-4, Forte Spring 2012

CPSU-FORTE-S12S5G4

6 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 409