Introducción

The LCD battery powers the Canon ZR70MC LCD screen. This guide will show you how to replace the battery for the LCD screen. You will need to replace the LCD battery if your LCD screen is dim or will not turn on. The LCD battery is very small compared to the battery pack so make sure you have a designated location to keep track of the LCD battery and replacement battery.

Partes

Open the LCD screen to expose the compartment where the LCD battery is held. Open the LCD screen to expose the compartment where the LCD battery is held.
  • Open the LCD screen to expose the compartment where the LCD battery is held.

Agregar Comentario

Free Shipping on all orders USD79.00 and up.

Visita Nuestra Tienda
MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Open the LCD battery compartment by pulling on the tab as seen in the picture. Open the LCD battery compartment by pulling on the tab as seen in the picture.
  • Open the LCD battery compartment by pulling on the tab as seen in the picture.

Agregar Comentario

Use tweezers to carefully  pull out the LCD battery. Use tweezers to carefully  pull out the LCD battery. Use tweezers to carefully  pull out the LCD battery.
  • Use tweezers to carefully pull out the LCD battery.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

khalid clarke

Miembro Desde 26/09/17

701 Reputación

7 Guías creadas

Equipo

USF Tampa, Team S13-G2, Boczar Fall 2017 Miembro de USF Tampa, Team S13-G2, Boczar Fall 2017

USFT-BOCZAR-F17S13G2

3 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 16