Canon PowerShot SD700 Outside Case Replacement

Introducción

This guide will help you remove and replace the outside case of the Canon PowerShot SD700. Follow the step-by-step instructions to remove the outside case of your Canon PowerShot SD700. You will need Phillips #00 screwdriver to complete the steps throughout the guide.

Qué necesitas

Paso 1 Outside Case

Canon PowerShot SD700 Outside Case Replacement, Outside Case: paso 1, imagen 1 de 1

Turn off the camera by pressing the power button above the LCD screen.

Traducir

Paso 2

Remove the two, small screws on the bottom of the camera using a Phillip's #00 screwdriver.

Traducir

Paso 3

Use a Phillips #00 screwdriver to remove the two, small screws on the right side of the camera.

Traducir

Paso 4

Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out Digital label.

Traducir

Paso 5

Use a Phillips #00 screwdriver, remove the screw on the bottom of the camera near the battery and memory card slots.
This screw will be longer than the rest of the screws.

Traducir