Saltar al contenido principal

Canon PowerShot SD1000 Back Panel Replacement

Qué necesitas

  1. Canon PowerShot SD1000 Back Panel Replacement, Back Panel: paso 1, imagen 1 de 2 Canon PowerShot SD1000 Back Panel Replacement, Back Panel: paso 1, imagen 2 de 2
    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. Canon PowerShot SD1000 Back Panel Replacement: paso 2, imagen 1 de 1
    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. Canon PowerShot SD1000 Back Panel Replacement: paso 3, imagen 1 de 1
    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. Canon PowerShot SD1000 Back Panel Replacement: paso 4, imagen 1 de 1
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Canon PowerShot SD1000 Back Panel Replacement: paso 5, imagen 1 de 1
    • Remove the small cover panel and the attached wrist strap mount.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Phillip Phung

Miembro Desde 01/19/12

624 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 8-18, Maness Winter 2012 Miembro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 16

Todo El Tiempo: 1,846