Repara tus cosas Comunidad Tienda

Canon PowerShot S400 Shutter Button Assembly Replacement

Introducción

This guide provides instructions on how to replace the shutter button assembly on the Canon PowerShot S400.

Qué necesitas

  1. Canon PowerShot S400 Shutter Button Assembly Replacement, Shutter Button Assembly: paso 1, imagen 1 de 2 Canon PowerShot S400 Shutter Button Assembly Replacement, Shutter Button Assembly: paso 1, imagen 2 de 2

    • Unless otherwise stated,a #00 philips screwdriver will be used to remove screws.

    • Remove the 4.75mm screw located in the top right corner of the backside of the camera.

    • Remove the four # screws located on the bottom of the camera.

    Traducir

  2. Canon PowerShot S400 Shutter Button Assembly Replacement: paso 2, imagen 1 de 3 Canon PowerShot S400 Shutter Button Assembly Replacement: paso 2, imagen 2 de 3 Canon PowerShot S400 Shutter Button Assembly Replacement: paso 2, imagen 3 de 3

    • Remove the two screws located on the right side of the camera.(the side with the USB adaption plug)

    • Remove the four screws on the left side of the camera.

    • This will release a small metal plate. Remove this plate.

    Traducir

  4. Canon PowerShot S400 Shutter Button Assembly Replacement: paso 3, imagen 1 de 3 Canon PowerShot S400 Shutter Button Assembly Replacement: paso 3, imagen 2 de 3 Canon PowerShot S400 Shutter Button Assembly Replacement: paso 3, imagen 3 de 3

    • There is a small black plastic piece that sits above the lens underneath the camera case. This plastic piece may fall out when you remove the cases; recover the piece and save it.

    • Now separate the front and back camera casings.

    Traducir

  5. Canon PowerShot S400 Shutter Button Assembly Replacement: paso 4, imagen 1 de 1

    • Using a spudger, carefully pry the shutter button assembly from the camera.

    • Install the replacement shutter button assembly.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Ross Bryan

Miembro Desde 01/21/11

359 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 5-19, Amido Winter 2011 Miembro de Cal Poly, Team 5-19, Amido Winter 2011

CPSU-AMIDO-W11S5G19

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 2,669