Introducción

Take out old, dead batteries. Then replace them with new ones.

Place the camera so the battery cover is facing up, as shown in the picture. Gently push on the outer battery cover until you hear a click, and then release.
  • Place the camera so the battery cover is facing up, as shown in the picture.

  • Gently push on the outer battery cover until you hear a click, and then release.

Agregar Comentario

To open the inner battery cover, push down on the grey latch until you hear a click, and then release. Remove the dead batteries from the camera.
  • To open the inner battery cover, push down on the grey latch until you hear a click, and then release.

  • Remove the dead batteries from the camera.

Agregar Comentario

After removing the batteries, insert the new batteries in the proper direction.
  • After removing the batteries, insert the new batteries in the proper direction.

  • Now push the black, inner cover down until you hear a click to secure the batteries in place.

  • Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.

Agregar Comentario

Conclusión

Congratulations, you're done.

Ellen Chambers

Miembro Desde 05/01/11

231 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 7-37, Regan Winter 2011 Miembro de Cal Poly, Team 7-37, Regan Winter 2011

CPSU-REGAN-W11S7G37

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 6

Todo El Tiempo: 1,593