Introducción

This guide shows you how to install a new LCD screen.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
  • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

Agregar Comentario

Using your finger, peel back the textured grip so the components are separated. Using your finger, peel back the textured grip so the components are separated.
  • Using your finger, peel back the textured grip so the components are separated.

Agregar Comentario

Using the flat end of a spudger, loosen the connection between the front panel and the device. Remove the front panel using your hands. Remove the front panel using your hands.
  • Using the flat end of a spudger, loosen the connection between the front panel and the device.

  • Remove the front panel using your hands.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Turn Camera over.
  • Turn Camera over.

  • Using a #00 Phillips screw driver, unscrew the two 4.9 mm Phillips screws located on either side of the viewfinder.

Agregar Comentario

Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.
  • Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.

Agregar Comentario

Lay the camera on its back.
  • Lay the camera on its back.

  • Unsolder the flash connection from the motherboard as noted by the blue circle.

Agregar Comentario

Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera. Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera. Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.
  • Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.

Agregar Comentario

Pry off the small metal brace holding the LCD screen. (Push forward and slide toward the center) Pry off the small metal brace holding the LCD screen. (Push forward and slide toward the center)
  • Pry off the small metal brace holding the LCD screen. (Push forward and slide toward the center)

Agregar Comentario

Lift out the LCD screen.
  • Lift out the LCD screen.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Zach

Miembro Desde 04/04/12

40 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 14-9, Forte Spring 2012 Miembro de Cal Poly, Team 14-9, Forte Spring 2012

CPSU-FORTE-S12S14G9

5 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 880