Saltar al contenido principal

Canon EOS 30 Lens Mount Rings

Qué necesitas

  1. Canon EOS 30 Lens Mount Rings, Front Panel: paso 1, imagen 1 de 1
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Canon EOS 30 Lens Mount Rings: paso 2, imagen 1 de 1
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. Canon EOS 30 Lens Mount Rings: paso 3, imagen 1 de 1
    • Remove the 4.8 mm black screw on the left side of the camera.

  4. Canon EOS 30 Lens Mount Rings: paso 4, imagen 1 de 1
    • Remove the front panel by lifting it away from the camera's body.

  5. Canon EOS 30 Lens Mount Rings, Lens Mount Rings: paso 5, imagen 1 de 1
    • Remove four 7.1 mm silver screws from lens mount ring.

  6. Canon EOS 30 Lens Mount Rings: paso 6, imagen 1 de 1
    • Remove outer mount ring.

    • The silver button may detach.

  7. Canon EOS 30 Lens Mount Rings: paso 7, imagen 1 de 1
    • Remove thin gold ring.

    • Correct orientation is pictured.

  8. Canon EOS 30 Lens Mount Rings: paso 8, imagen 1 de 1
    • Remove thin silver ring.

    • Correct orientation is pictured.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Antonia

Miembro Desde 04/17/11

124 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 8-8, Regan Spring 2011 Miembro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Miembros

22 Guías creadas

Un comentario

Very handy. One addition though - the silver button lever is on the wrong side - it is not facing the mirror box but the plastic lens release button. Plus, you are missing the fact that there is a spring underneatch the silver leaver which keeps the mount pin coming back up.

Patryk Granatowicz - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 10

Ultimos 30 días: 26

Todo El Tiempo: 5,456