Introducción

This guide describes the steps necessary to replace the motherboard of the system. This board contains the circuitry for the amplification, power, and output.

Remove 2 screws from each side of the amplifier.
  • Remove 2 screws from each side of the amplifier.

Agregar Comentario

Remove 2 screws on rear of device. Slide top cover up and back from main case.
  • Remove 2 screws on rear of device. Slide top cover up and back from main case.

Agregar Comentario

Remove 3 screws on bottom of case. Remove 13 screws on rear panel.
  • Remove 3 screws on bottom of case.

  • Remove 13 screws on rear panel.

    • Do not move the rear panel too far, as the power cord is still connected.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Using a pair of pliers, squeeze the retainer for the power cord as shown and pull it toward the external side the panel.
  • Using a pair of pliers, squeeze the retainer for the power cord as shown and pull it toward the external side the panel.

  • It may require some wiggling, but it should slip out of the hole and then off of the cord.

Agregar Comentario

Remove 2 screws from each side of the heatsink. These must be accessed from directly above the device.
  • Remove 2 screws from each side of the heatsink. These must be accessed from directly above the device.

  • Remove the green grounding wire from the mounting screw.

Agregar Comentario

With the amplifier on it's side, remove the 4 screws that hold the motherboard frame to the main case.
  • With the amplifier on it's side, remove the 4 screws that hold the motherboard frame to the main case.

  • Be sure to hold the motherboard with one hand while removing the mount screws.

Agregar Comentario

Unscrew ground wire from main case. De solder 4 wires coming from transformer.
  • Unscrew ground wire from main case.

  • De solder 4 wires coming from transformer.

  • The motherboard can now be lifted from the case. Any part that needs to be removed from it can be de-soldered.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Colby

Miembro Desde 15/04/10

284 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 28-36, Regan Spring 2010 Miembro de Cal Poly, Team 28-36, Regan Spring 2010

CPSU-REGAN-S10S28G36

4 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 12

Todo El Tiempo: 5,191