Saltar al contenido principal

Cable set up

Qué necesitas

  1. Cable set up, Cable set up: paso 1, imagen 1 de 1
    • Check that the red RCA plug is connected to the red RCA jack labeled "R" (this indicates the Right speaker).

    • Check that the white RCA plug is connected to the white RCA jack labeled "L" (this indicates the Left speaker).

    • To connect the ground clip, loosen the ground screw and insert the clip. Once clip is secure tighten the screw.

  2. Cable set up: paso 2, imagen 1 de 1
    • Check the voltage selector switch to make sure its set to the proper voltage depending on your geographic location.

    • Voltage selector should be set to 115 V/60 Hz in the U.S., or 230 V/50 Hz in other countries.

  3. Cable set up: paso 3, imagen 1 de 1
    • Insert power cable into socket.

Linea de Meta

Nikolai

Miembro Desde 10/12/11

254 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 17-14, Regan Fall 2011 Miembro de Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 980