Repara tus cosas Comunidad Tienda

Blackberry Curve 8310 Screen Housing Replacement

Qué necesitas

  1. Blackberry Curve 8310 Screen Housing Replacement, Battery: paso 1, imagen 1 de 1

    • Press down on the battery release button and slide the back cover up with your thumb.

    Traducir

  2. Blackberry Curve 8310 Screen Housing Replacement: paso 2, imagen 1 de 1

    • Pry from the top of the battery to pull it out.

    Traducir

  3. Blackberry Curve 8310 Screen Housing Replacement, Lens: paso 3, imagen 1 de 1

    • Slide the metal sim card cover to the unlock position.

    • Remove the sim card.

    • The arrows on the sim card enclosure indicate the lock and unlock positions.

    Traducir

  4. Blackberry Curve 8310 Screen Housing Replacement: paso 4, imagen 1 de 1

    • Remove the two T5 Torx screws circled at the top of the phone.

    • The T5 Torx screws may be covered by a white sticker.

    Traducir

  6. Blackberry Curve 8310 Screen Housing Replacement: paso 5, imagen 1 de 1

    • Remove the red cover at the bottom of the phone.

    • You may have to work a spudger underneath to release the plastic clips.

    Traducir

  7. Blackberry Curve 8310 Screen Housing Replacement: paso 6, imagen 1 de 3 Blackberry Curve 8310 Screen Housing Replacement: paso 6, imagen 2 de 3 Blackberry Curve 8310 Screen Housing Replacement: paso 6, imagen 3 de 3

    • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

    • Use a spudger to pry the front cover away from the side panels.

    • Work the spudger around the entire phone until the front cover is free.

    Traducir

  8. Blackberry Curve 8310 Screen Housing Replacement, Keyboard: paso 7, imagen 1 de 1

    • Remove the keyboard.

    Traducir

  9. Blackberry Curve 8310 Screen Housing Replacement, Screen Housing: paso 8, imagen 1 de 1

    • Remove the four T6 Torx screws located on the corners of the keyboard frame.

    Traducir

  10. Blackberry Curve 8310 Screen Housing Replacement: paso 9, imagen 1 de 2 Blackberry Curve 8310 Screen Housing Replacement: paso 9, imagen 2 de 2

    • Now remove the left and right side panels.

    Traducir

  11. Blackberry Curve 8310 Screen Housing Replacement: paso 10, imagen 1 de 3 Blackberry Curve 8310 Screen Housing Replacement: paso 10, imagen 2 de 3 Blackberry Curve 8310 Screen Housing Replacement: paso 10, imagen 3 de 3

    • Remove the keyboard frame.

    • Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.

    • Now remove the screen housing.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Sean Willis

Miembro Desde 01/26/12

229 Reputación

5 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 10-32, Amido Winter 2012 Miembro de Cal Poly, Team 10-32, Amido Winter 2012

CPSU-AMIDO-W12S10G32

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 1,651