Repara tus cosas Comunidad Tienda

Blackberry Bold 9000 LCD Screen Replacement

Qué necesitas

  1. Blackberry Bold 9000 LCD Screen Replacement, Battery: paso 1, imagen 1 de 1

    • Place your Blackberry facedown in front of you.

    Traducir

  2. Blackberry Bold 9000 LCD Screen Replacement: paso 2, imagen 1 de 1

    • Press the cover release button on the bottom of your device. Lift and remove the back cover.

    Traducir

  3. Blackberry Bold 9000 LCD Screen Replacement: paso 3, imagen 1 de 1

    • From the top, use your fingernail to lift the battery out.

    Traducir

  5. Blackberry Bold 9000 LCD Screen Replacement, Rear Case: paso 4, imagen 1 de 1

    • Remove the SIM card.

    Traducir

  6. Blackberry Bold 9000 LCD Screen Replacement: paso 5, imagen 1 de 1

    • Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.

    Traducir

  7. Blackberry Bold 9000 LCD Screen Replacement: paso 6, imagen 1 de 1

    • Use the plastic opening tool to remove the rear case.

    Traducir

  8. Blackberry Bold 9000 LCD Screen Replacement, LCD Screen: paso 7, imagen 1 de 1

    • With the same plastic opening tool, lift the motherboard up and out.

    • Remove the motherboard assembly from left to right, using caution near the audio jack on the right side of the device.

    Traducir

  9. Blackberry Bold 9000 LCD Screen Replacement: paso 8, imagen 1 de 1

    • Using a spudger, lift the ribbon band in the upper right-hand corner up and away from the motherboard assembly until it disconnects.

    Traducir

  10. Blackberry Bold 9000 LCD Screen Replacement: paso 9, imagen 1 de 1

    • Turn the motherboard assembly over.

    • Starting at the lower corners of the screen, begin to lift the screen away from the motherboard using the spudger.

    • Do this step very slowly to avoid breaking the screen or the motherboard. The backing will eventually separate.

    • Remove the plastic bit that hides the speaker grill - it is stuck with double-sided tape.

    • With a thin blade/pin, ease the speaker grill and the metal plate away from the old lcd screen.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Autor

con 6 otros colaboradores

Kelly

Miembro Desde 01/18/12

566 Reputación

6 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 8-17, Maness Winter 2012 Miembro de Cal Poly, Team 8-17, Maness Winter 2012

CPSU-MANESS-W12S8G17

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 7,510