Introducción

This guide outlines how to remove the battery connector from the device.

Partes

No se requieren partes.

With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
  • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

Agregar Comentario

Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
  • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

Agregar Comentario

Remove the battery by pushing against it from the right and then pulling towards you.
  • Remove the battery by pushing against it from the right and then pulling towards you.

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.
  • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

Agregar Comentario

Use a plastic opening tool or your fingernails to remove the plastic backing. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.
  • Use a plastic opening tool or your fingernails to remove the plastic backing.

  • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

Agregar Comentario

Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.
  • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

  • Place the four screws released from the phone in a plastic bag.

Agregar Comentario

The black battery casing and logic board can now be separated for the following steps.
  • The black battery casing and logic board can now be separated for the following steps.

Agregar Comentario

With the speaker facing you, place your fingers on the gold battery connector.
  • With the speaker facing you, place your fingers on the gold battery connector.

  • Pull upwards and release the battery connector from the black body piece.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

kelogan

Miembro Desde 04/11/09

1 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 9-17, Regan Fall 2009 Miembro de Cal Poly, Team 9-17, Regan Fall 2009

CPSU-REGAN-F09S9G17

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 3,159