Introducción

Replace your cracked LCD screen with a new one.

Partes

No se requieren partes.

Remove the battery cover by applying pressure and sliding down to the silver square on the back of the phone.
  • Remove the battery cover by applying pressure and sliding down to the silver square on the back of the phone.

Agregar Comentario

Remove the battery by prying under it with your finger or the plastic opening tool. Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.
  • Remove the battery by prying under it with your finger or the plastic opening tool.

  • Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.

Agregar Comentario

Use a plastic opening tool (similar to the one shown) to carefully remove the two side bars of plastic. Use a plastic opening tool (similar to the one shown) to carefully remove the two side bars of plastic.
  • Use a plastic opening tool (similar to the one shown) to carefully remove the two side bars of plastic.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Use the plastic opening tool to carefully pry the back casing off.
  • Use the plastic opening tool to carefully pry the back casing off.

    • There are two small clamps on each edge that need to be unhooked before the casing will come off.

Agregar Comentario

Pry off the front casing
  • Pry off the front casing

    • Be aware of sensors and other sensitive areas of the newly exposed electronics

Agregar Comentario

After disassembling the outer casing, the phone should be stripped as shown.
  • After disassembling the outer casing, the phone should be stripped as shown.

Agregar Comentario

At the top of the phone, locate the gloss SATA cable strap connecting the LCD screen to the phone. Using the prying tool, unattach this cable by levering under the connector.
  • At the top of the phone, locate the gloss SATA cable strap connecting the LCD screen to the phone.

  • Using the prying tool, unattach this cable by levering under the connector.

Agregar Comentario

Using the prying tool, lever up the old screen as shown. WARNING: Be sure to have disconnected the SATA cable strap prior to attempting this.
  • Using the prying tool, lever up the old screen as shown.

  • WARNING: Be sure to have disconnected the SATA cable strap prior to attempting this.

Agregar Comentario

Insert new LCD screen. Attach cable to the connector located at the top of the phone.
  • Insert new LCD screen.

  • Attach cable to the connector located at the top of the phone.

  • Phone should look as it was prior to screen removal.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

ryan

Miembro Desde 12/04/13

41 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 13-64, Johann Spring 2013 Miembro de Cal Poly, Team 13-64, Johann Spring 2013

CPSU-JOHANN-S13S13G64

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 455