Introducción

This will show you how to repair the vibrating motor in your blackberry.

Partes

No se requieren partes.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Agregar Comentario

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Lift off the back cover.
  • Lift off the back cover.

Agregar Comentario

Remove the two T6 screws.
  • Remove the two T6 screws.

Agregar Comentario

Remove the daughterboard. Remove the exposed vibration motor.
  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Agregar Comentario

Replace with new vibration motor
  • Replace with new vibration motor

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Miembro Desde 24/01/10

12 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 14-44, Regan Winter 2010 Miembro de Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 3

Todo El Tiempo: 4,341