Introducción

This is a guide showing how to repair your keypad for the RIM blackberry 7510.

Partes

No se requieren partes.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Agregar Comentario

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Agregar Comentario

Lift off the back cover.
  • Lift off the back cover.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the two T6 screws.
  • Remove the two T6 screws.

Agregar Comentario

Remove the daughterboard. Remove the exposed vibration motor.
  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Agregar Comentario

Unscrew metal plate. Pry off front cover. Lift off front cover to expose LCD screen.
  • Unscrew metal plate.

  • Pry off front cover.

  • Lift off front cover to expose LCD screen.

Agregar Comentario

Remove keypad from front cover and replace or fix existing pad.
  • Remove keypad from front cover and replace or fix existing pad.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Miembro Desde 24/01/10

12 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 14-44, Regan Winter 2010 Miembro de Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 2,447