Introducción

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

Make sure the blender is turned off and unplugged from all power.
  • Make sure the blender is turned off and unplugged from all power.

  • Remove the glass jar from the base of the blender.

Agregar Comentario

Remove the top lid from the blender jar.
  • Remove the top lid from the blender jar.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
  • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

  • Take care not to cut yourself on the blades.

Agregar Comentario

Lift the rubber washer straight up to remove it from the blade assembly.
  • Lift the rubber washer straight up to remove it from the blade assembly.

  • Take care not to cut yourself on the blades.

Agregar Comentario

Lift the blades from the bottom cap.
  • Lift the blades from the bottom cap.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Andrew

Miembro Desde 04/10/12

170 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 6-34, Regan Fall 2012 Miembro de Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 11

Últimos 30 Días: 45

Todo El Tiempo: 2,836