Introducción

Removing the metal Shield of the Apple display. This shield protects the components from electromagnetic interference.

Partes

No se requieren partes.

Lay the display facing down with the stand away from you. Remove the three size 2.0 hex screws on the swing arm and remove the swing arm as well as the plastic shield under it.
  • Lay the display facing down with the stand away from you.

  • Remove the three size 2.0 hex screws on the swing arm and remove the swing arm as well as the plastic shield under it.

Agregar Comentario

Remove the size 2.5 hex screws from each corner that connects the panels to the display and remove them.
  • Remove the size 2.5 hex screws from each corner that connects the panels to the display and remove them.

Agregar Comentario

Rotate the display so the legs of the display are now facing you
  • Rotate the display so the legs of the display are now facing you

  • Grip the top of the clear panel and lift it upwards, and pull the ADC cable through the hole.

Agregar Comentario

Guía de regalos para el día del padre
Honremos a más que nuestros padres—celebremos a todos los mentores que nos enseñaron a reparar.
Guía de regalos para el día del padre
Honremos a aquellos que nos enseñaron a reparar.
Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole.
  • Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole.

Agregar Comentario

The next layer will be a shiny metal panel, which might have some stickers. Make sure to remove these stickers.
  • The next layer will be a shiny metal panel, which might have some stickers. Make sure to remove these stickers.

Agregar Comentario

Now locate and remove the lone screw holding the EMI shield to the display
  • Now locate and remove the lone screw holding the EMI shield to the display

Agregar Comentario

Now that the screw has been removed, slide the panel towards your body and lift it out. You may need to remove the clear USB port cover to remove the metal EMI shield.
  • Now that the screw has been removed, slide the panel towards your body and lift it out.

    • You may need to remove the clear USB port cover to remove the metal EMI shield.

Agregar Comentario

Linea de Meta

Alan Truong

Miembro Desde 19/01/10

398 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 3-20, Maness Winter 2010 Miembro de Cal Poly, Team 3-20, Maness Winter 2010

CPSU-MANESS-W10S3G20

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 1,716