Saltar al contenido principal

Acer AL1916 Outer Case Replacement

Qué necesitas

  1. Acer AL1916 Outer Case Replacement, Stand: paso 1, imagen 1 de 1
    • Lay the monitor on a flat surface so that the back is facing up.

  2. Acer AL1916 Outer Case Replacement: paso 2, imagen 1 de 2 Acer AL1916 Outer Case Replacement: paso 2, imagen 2 de 2
    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

  3. Acer AL1916 Outer Case Replacement: paso 3, imagen 1 de 2 Acer AL1916 Outer Case Replacement: paso 3, imagen 2 de 2
    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

  4. Acer AL1916 Outer Case Replacement, Outer Case: paso 4, imagen 1 de 2 Acer AL1916 Outer Case Replacement, Outer Case: paso 4, imagen 2 de 2
    • Remove the five 9.5 mm Phillips #2 screws located around the perimeter of the monitor.

  5. Acer AL1916 Outer Case Replacement: paso 5, imagen 1 de 3 Acer AL1916 Outer Case Replacement: paso 5, imagen 2 de 3 Acer AL1916 Outer Case Replacement: paso 5, imagen 3 de 3
    • Starting at the corner of the monitor, wedge the small plastic opening tool between the back cover and the display bezel.

    • Tilt the plastic opening tool up to separate the back cover from the display bezel.

    • Continue around the perimeter of the monitor until the display bezel comes off.

    • A reasonable amount of force is necessary to detach the back cover from the display bezel.

  6. Acer AL1916 Outer Case Replacement: paso 6, imagen 1 de 2 Acer AL1916 Outer Case Replacement: paso 6, imagen 2 de 2
    • Reposition the monitor so that the back is facing up.

    • Grab the corners of the monitor and jiggle them upwards to detach the back cover from the inside of the monitor.

    • Lift the back cover up.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Keith

Miembro Desde 10/06/11

336 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 20-26, Maness Fall 2011 Miembro de Cal Poly, Team 20-26, Maness Fall 2011

CPSU-MANESS-F11S20G26

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 1,228