Introducción

This repair guide will guide you through the steps to removing and replacing the power switch of your APS Tech 101629 CD-Drive.

First the external casing, and channel switch will need to be removed.

Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool. Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool. Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool.
  • Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool.

Agregar Comentario

Unscrew the four screws previously covered by the feet. Unscrew the four screws previously covered by the feet.
  • Unscrew the four screws previously covered by the feet.

Agregar Comentario

Flip the device right side up, then gently slide the casing upwards and off the hard drive. Flip the device right side up, then gently slide the casing upwards and off the hard drive.
  • Flip the device right side up, then gently slide the casing upwards and off the hard drive.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Flip device upside down again.
  • Flip device upside down again.

  • Gently pry the bottom gray casing away from the device.

Agregar Comentario

Rotate so back of device is facing you, then gently pry the back casing away. When back casing is removed, the fan will become loose.
  • Rotate so back of device is facing you, then gently pry the back casing away.

  • When back casing is removed, the fan will become loose.

Agregar Comentario

Disconnect ID cable. Make sure to lift the white portion of the connection first, as this holds the two connectors together.
  • Disconnect ID cable.

  • Make sure to lift the white portion of the connection first, as this holds the two connectors together.

Agregar Comentario

For easier access the fan is loose and can be easily moved but not disconnected. Using spudger, depress pressure holders at all 4 corners. Pull out, removing cord as well.
  • For easier access the fan is loose and can be easily moved but not disconnected.

  • Using spudger, depress pressure holders at all 4 corners.

  • Pull out, removing cord as well.

Agregar Comentario

Depress 2 pressure holds on each side of the power switch. Press out the back of the device.
  • Depress 2 pressure holds on each side of the power switch.

  • Press out the back of the device.

Agregar Comentario

Remove all four 4 connections from the power switch. Remember that the straight connections are on the far side, while the L-shaped connections are on the near side, and that both yellow connections are on top. This is helpful for reassembly.
  • Remove all four 4 connections from the power switch.

    • Remember that the straight connections are on the far side, while the L-shaped connections are on the near side, and that both yellow connections are on top. This is helpful for reassembly.

  • These are very hard to get off, use patience and wiggling.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Alexis Weckel

Miembro Desde 11/04/11

140 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 24-60, Amido Spring 2011 Miembro de Cal Poly, Team 24-60, Amido Spring 2011

CPSU-AMIDO-S11S24G60

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 459