Repara tus cosas Comunidad Tienda

2004 Toyota Sienna Sliding Door Motor Replacement

Introducción

This guide will show you how to diagnose and fix the common issue with the 2004-2010 Toyota Sienna sliding door.

The repair is easy but patience is a must as you do not want to strip the screws.

Qué necesitas

Resumen del Video

  1. 2004 Toyota Sienna Sliding Door Motor Replacement, Sliding Door Motor: paso 1, imagen 1 de 1

    • First, test both sliding doors to identify the problem with the driver's side door

    • source.

    Traducir

  2. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 2, imagen 1 de 1

    • Remove the second-row seat to access the door panel

    • source.

    Traducir

  3. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 3, imagen 1 de 1

    • Remove the two Phillips screws holding the door panel in place

    • source.

    Traducir

  4. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 4, imagen 1 de 1

    • Carefully remove the door panel by lifting it out and disconnect the power window

    • source.

    Traducir

  6. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 5, imagen 1 de 1

    • Close the door and observe the actuator motor on the working passenger side door for comparison

    • source.

    Traducir

  7. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 6, imagen 1 de 1

    • On the driver's side door, test the voltage to confirm it's an issue with the actuator motor and not an electrical problem

    • source.

    Traducir

  8. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 7, imagen 1 de 1

    • Order a replacement actuator motor (Part #s in the video) and wait for its arrival

    • source.

    Traducir

  9. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 8, imagen 1 de 1

    • Remove the window regulator by lowering the window and accessing the bolts through the portholes

    • source.

    Traducir

  10. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 9, imagen 1 de 1

    • Remove the actuator motor by grinding off the stripped Phillips screws with a Dremel tool or using vice grips

    • source.

    Traducir

  11. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 10, imagen 1 de 1

    • Replace the actuator motor with the new part, using socket screws from wall sockets or light switches if necessary

    • source.

    Traducir

  12. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 11, imagen 1 de 1

    • Reassemble the window regulator and test the window function

    • source.

    Traducir

  13. 2004 Toyota Sienna Sliding Door Motor Replacement: paso 12, imagen 1 de 1

    • Test the sliding door in manual mode and then in power mode

    • source.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 5 otros colaboradores

eCuration

Miembro Desde 05/19/17

376,693 Reputación

234 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,817 Guías creadas

Un comentario

Great instructions! I was able to fix sliding door.

However, the window doesn’t scroll up all the way and it wiggles if you pull on it.

What did did I do wrong? Any suggestions are appreciated.

Nara Lim - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 24

Todo El Tiempo: 2,183