Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 22 guías que incluyen este paso.

Volver a la Guía
Inglés
Español
Paso anterior

Traduciendo paso 5

Paso 5
With the display panel still lifted, disconnect the four inverter cables. During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.

  • With the display panel still lifted, disconnect the four inverter cables.

  • During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.

  • During reassembly, the order of the inverter cables is interchangeable within each socket.

  • If you are replacing a hard drive and have an extra set of hands, it is possible to reach in and remove the drive without disconnecting anything but the LCD temp and display connector in the previous step with the LCD in its propped position.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.